TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 1225 of 1324

PREPARE VEHICLE FOR TOWING - Continued

2.

Perform the following on disabled vehicle:

a.

Remove propeller shaft between transfer case and No. 3 axle.

b.

Install axle restraint chains (1):

3

2

1

4

Figure 2.

NOTE

•

Axle restraint chains are installed the same way, driver side

shown.

•

No. 2 axle should be restrained with chains on both sides of

vehicle.

(1)

Route axle restraint chain (1) under engine shroud (2), over frame rail (3),

and around axle (4).

(2)

Hook axle restraint chain (1) back into itself as shown.

(3)

Repeat Steps (1) and (2) for opposite side of No. 2 axle (3).

END OF TASK

TM 9-2320-434-10

0165

0165-3