TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 1231 of 1324

OPERATOR MAINTENANCE

CHANGE WHEEL AND TIRE ASSEMBLY

INITIAL SETUP:

Tools and Special Tools

Chocks, Wheel (2) (WP 0174, Table 3,

Item 9)

Extension, Handle (WP 0174, Table 3,

Item 16)

Handle, Wrench (WP 0174, Table 3,

Item 18)

Jack, 12-ton, With Handle (WP 0174,

Table 3, Item 23)

Jack, Base Plate (WP 0174, Table 3,

Item 25)

Tools and Special Tools - Continued

Warning Device Set, Triangular

(WP 0174, Table 3, Item 29)

Wrench, Wheel Lugnut (WP 0174,

Table 3, Item 40)

Wrench, Adjustable (WP 0174,

Table 3, Item 38)

Personnel Required

Operator and Assistant - - - (2)

PREPARE VEHICLE

1.

Shut off engine. (WP 0051)

WARNING

Park vehicle in safe area, out of traffic, where there is no danger to

personnel changing tire assembly. Park vehicle on hard level ground.

Failure to comply may result in injury or death to personnel.

2.

Turn on emergency flashers. (WP 0089)

3.

Set up emergency marker kit, as necessary. (WP 0112)

END OF TASK

SET UP TIRE DAVIT WINCH

1.

Remove hoist arm (1) from mounting bracket (2).

TM 9-2320-434-10

0167

0167-1