TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 241 of 1324

OPERATE TRANSFER CASE - Continued

CAUTION

•

Do not force TRANSFER CASE shift lever. Lever may work hard if

there is drive line windup. Using excessive force on shift lever may

cause damage to shift linkage or change linkage adjustment.

•

Do not move TRANSFER CASE shift lever when vehicle is moving,

or when transmission is in gear. Severe damage to drive line may

result.

4.

Select transfer case position.

NOTE

If TRANSFER CASE shift lever is hard to move, set transmission range

selector to D, then back to N. If transfer case will not shift, refer to

troubleshooting procedures. (WP 0152)

5.

Set TRANSFER CASE shift lever (3) to H (HI) for highway driving.

NOTE

Selecting L (LO) position automatically selects 8X8 drive in the vehicle

traction control system.

6.

Set TRANSFER CASE shift lever (3) to L (LO) for off-road driving, 8X8 indicator light

(4) will illuminate.

END OF TASK

END OF WORK PACKAGE

TM 9-2320-434-10

0042

0042-3