TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 247 of 1324

OPERATOR MAINTENANCE

DRIVE VEHICLE IN REVERSE

INITIAL SETUP:

Personnel Required

Operator and Assistant - - - (2)

PREPARE VEHICLE

1.

Remove and stow wheel chocks.

2.

Adjust seat and mirrors as needed.

3.

Adjust air-ride seat and mirrors as needed. (WP 0094)

4.

Adjust three-point seatbelt as needed. (WP 0093)

5.

Adjust four-point seatbelt as needed. (WP 0095)

6.

Start engine. (WP 0038)

7.

Turn on lights as required.

DRIVE VEHICLE IN REVERSE

WARNING

Do not press service brake treadle hard three or four times in a row. Air

supply will be used up and service brakes will not work until air is built up

again. Failure to comply may result in injury or death to personnel.

1.

Make sure both needles (red and green) on AIR PRESS gauge (1) read at least 100

psi (690 kPa) before driving vehicle.

TM 9-2320-434-10

0045

0045-1