TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 251 of 1324

OPERATOR MAINTENANCE

DRIVE VEHICLE IN CITY TRAFFIC AND ON HIGHWAY

INITIAL SETUP:

Not Applicable

OPERATE VEHICLE

WARNING

Speed limits posted on curves reflect speeds that are considered safe for

automobiles. Heavy vehicles with a high center of gravity can roll over at

these speed limits. Use care and reduce your speed below the posted

limit prior to entering a curve. Failure to comply may result in injury or

death to personnel.

CAUTION

•

Before starting over-the-road operation, make sure that the Hydraulic

Selector Switch and PTO ENGAGE switch (WP 0022) are both set

to OFF position. If AUTO circuits have failed, and manual load

operation was used, set Hydraulic Selector Switch to MAN TRANS

(WP 0022) position.

•

Do not move TRANSFER CASE shift lever when vehicle is moving

or when transmission is in gear. Severe damage to drive line will

result.

1.

Set TRANSFER CASE shift lever (1) to HI.

TM 9-2320-434-10

0046

0046-1