LOADING - Continued
•
When container is on side slope, it may be difficult to get both upper
hooks properly seated. Front lift adapter hangs level. To get front lift
adapter to hang closer to same angle as container, it may be
necessary to temporarily remove one rear container lock from slider
and stow on downhill side of front lift adapter.
30.
Release service brake pedal (4) and, moving joystick (10) to UNLOAD, lower slide
arm upper front hooks (17) into container upper corner castings (18).
31.
Apply service brake pedal (4) and set transmission range selector (5) to D (drive).
32.
Release service brake pedal (4) and move vehicle forward approximately 1 ft. (30 cm).
NOTE
LHS will only operate when transmission range selector is in N (neutral).
33.
Apply service brake pedal (4) and set transmission range selector (5) to N (neutral).
34.
Move joystick (10) to UNLOAD until lower container locks (19) are aligned with
container lower front corner castings (20).
TM 9-2320-434-10
0053
0053-14