TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 306 of 1324

LOADING - Continued

CAUTION

Engine speed must be at idle before using hydraulic selector switch, or

damage to equipment may result.

48.

Turn hydraulic selector switch (9) to AUTO. Resume normal AUTO operations.

NOTE

Engine speed may be increased and decreased to ease loading.

49.

After container (6) contacts rear sliders (16), increase engine speed to approximately

1500 rpm until container is almost loaded. Reduce engine speed to idle.

CAUTION

After completing loading operations using CHU kit and container (LHS

NO TRANSIT indicator goes out), operator must release the joystick from

the LOAD position. Failure to release the joystick may cause LHS OVER

LOAD indicator to illuminate and hydraulic cylinders to remain active,

forcing a temporary bow in the LHS frame, resulting in contact between

LHS and container.

50.

Continue loading until container (6) is fully loaded and LHS NO TRANS indicator (23)

goes out.

TM 9-2320-434-10

0053

0053-22