OPERATOR MAINTENANCE
INSTALLATION/REMOVAL OF RAIL TRANSPORT STRUT
INITIAL SETUP:
Not Applicable
RAIL TRANSPORT STRUT INSTALLATION
NOTE
•
Ensure ISO lower corner castings are free of dirt and debris.
•
There are two ISO corner locks. Both are opened the same way.
Passenger side shown.
•
Ensure container is fully loaded on vehicle and rear container locks
are opened, refer to; loading/unloading container (82 inches [208 cm]
or taller) to vehicle using front lift adapter (FLA) (WP 0053), loading/
unloading container (72 inches [183 cm] or taller) to vehicle using
front lift adapter (FLA) (WP 0054), loading/unloading container (51
inches [130 cm] or taller) to vehicle using front lift adapter (FLA)
(WP 0055), and loading/unloading container (48 inches [122 cm] or
taller) to vehicle using front lift adapter (FLA) (WP 0056).
1.
Remove lock pin (1) from bracket (2) and lift tab (3) to unlock handle (4).
TM 9-2320-434-10
0061
0061-1