TM-9-2320-434-10
TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-434-10 - Page 489 of 1324
RAIL TRANSPORT STRUT INSTALLATION - Continued
NOTE
ISO corner lock handle will point toward front or rear of vehicle when in
locked position.
4.
Rotate lock handle (4) 90 degrees to locked position and tighten handnut (5).
5.
Rotate tab (3) down to lock handnut (5) and install lock pin (1) in bracket (10).
WARNING
Rail transport struts weigh 60 lbs (27 kg). Do not attempt to lift or move
rail transport struts without the aid of an assistant. Failure to comply may
result in injury or death to personnel.
6.
Remove two lock pins (11), pins (12), and rail transport strut (13) from stowage bracket
(7).
Back to Top
