TM-9-2320-434-10

TRUCK, LOAD HANDLING SYSTEM (LHS), 8X8, M1120

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-434-10 - Page 723 of 1324

WINCH MIRED VEHICLE FORWARD - Continued

Recovery Winch Cable to Another Vehicle (WP 0101) for connecting

procedures.

30.

If it is determined using self-recovery winch (10) will not go over winch pull capacity,

connect winch cable (9) to heavy object.

31.

Ensure winch shift lever (4) is at center position.

32.

Ensure PTO ENGAGE switch (2) is set to OFF position. Indicator light (3) will go out.

WARNING

•

Always wear protective gloves when handling winch cable. Never let

cable run through hands. Frayed cables can cut severely. Failure to

comply may result in injury or death to personnel.

•

Never operate winch with less than five wraps of cable on winch

drum. Failure to comply may result in injury or death to personnel.

33.

Pull back and hold tension pulley lever (20).

TM 9-2320-434-10

0099

0099-11