TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 372 of 1168

HIGH-BANK LAUNCH OF BRIDGE BAY - Continued

51.

Have boat crew unfold bridge bay by completing the following procedures:

a.

Insert handle with lanyard into the one engaged bay travel latch.

b.

Keep free end of lanyard aboard boat.

c.

Move boats clear of area required for unfolding bridge bay.

d.

Pull lanyard to release bridge bay unfolding operation.

e.

Secure bridge bay to boat after unfolding.

52.

Set transmission range selector (8) to N (neutral) and push in PARKING BRAKE

control (7).

TRAILER

AIR SUPLY

PULLTOEX

HAUST

PUSHTO

SUPPLY

7

8

Figure 15.

53.

Move vehicle forward to allow sufficient space for another bridge bay to be unloaded

next to edge of high-bank.

NOTE

If this is the last bridge bay to be launched, go to Step (50). Otherwise,

go to Step (49).

54.

Repeat Steps (23) through (48).

55.

Set HIGH IDLE switch (19) to ON position.

TM 9-2320-435-10

0046

0046-20