WINCH MIRED VEHICLE TO THE REAR - Continued
56.
Release tension pulley lever (14).
57.
Pull winch cable (9) forward and out of cable guide (11).
58.
Set PTO ENGAGE switch (2) to ON position. Indicator light (3) will illuminate.
3
2
4
9
8
7
6
5
10
M977 SHOWN
Figure 34.
59.
Move winch shift lever (4) to IN position to reel in cable while assistant guides winch
cable (9) to tie down ring (8).
60.
When clevis (7) is approximately 2 ft. (61 cm) from winch (10), release winch shift
lever (4) to center position.
61.
Assistant connects clevis (7) to tie down ring (8) with pin (6) and cotter pin (5).
TM 9-2320-435-10
0098
0098-38