TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

  TM-9-2320-435-10 - Page 645 of 1168

OPERATOR MAINTENANCE
CONNECT/DISCONNECT SELF-RECOVERY WINCH CABLE TO ANOTHER VEHICLE
INITIAL SETUP:
Not Applicable
CONNECT CABLE TO VEHICLE
CAUTION
When attaching self-recovery winch cable to another vehicle, that vehicle
must be used only as an anchor point or damage to equipment can result.
NOTE
There are three tie down rings on each side of vehicle.
1.
Unscrew one tie down ring (1) from mounting plate (2).


Back to Top