TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1021 of 1616

TM 9-2320-440-13&P

0139-7

0139

INSTALLATION

NOTE

•

Both MRP elevation cylinders are installed the same way.

Left side shown.

•

Both MRP elevation cylinders must be extended approximately 7.5 in. (19.05 cm).

•

Install cable ties as required.

•

Perform step (1) if band clamps need to be installed.

1.

Install three band clamps (57) on cylinder (24).

NOTE

Install elbows and fittings as noted prior to removal.

2.

Lightly lubricate four preformed packings (53, 54, 55, and 56) with clean oil and install preformed

packings (53, 54, 55, and 56), three elbows (14, 23, and 32), and tee (20) on cylinder (24).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Lightly lubricate preformed packing (52) with clean oil and install preformed packing (52) on tube (42).

4.

Install tube (42) on elbow (17).

5.

Install three saddle brackets (48) on cylinder (24) with three U-bolts (50) and six locknuts (51).

6.

Install six caps (49) on three U-bolts (50).

7.

Install tube (42) on three saddle brackets (48) with clamps (47), cover plates (46), six lockwashers (45), and

screws (44).

THAAD0146