TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 1016 of 1616

TM 9-2320-440-13&P

0139-2

0139

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Shafts should remain in extended position after being pulled out.

5.

Cut and remove two safety wires (6) securing two solenoid shafts (7 and 8).

6.

Pull out two solenoid shafts (7 and 8) approximately 0.13 in. (3.3 mm) and turn counterclockwise one quarter

turn.

7.

Push and hold palm button switch (9).

WARNING

When operating MRP elevation cylinders,

personnel must stay clear of cylinders.

Failure to comply may result in serious injury or death to personnel.

NOTE

Cylinder head must be extended approximately 7.5 in. (19.05 cm).

8.

Use lever (10) and extend cylinder head (11).

9.

Shut off engine (

THAAD0141

TM 9-2320-347-10)