TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 169 of 1616

TM 9-2320-440-13&P

0020-15

0020

GROUND ROD DRIVER DOES NOT OPERATE (CONTINUED)

THAAD0649

WARNING

Remove rings, wristwatches, neck chains, and any other jewelry before working

around vehicle.

Jewelry can catch on equipment and cause serious injury.

Jewelry

and tools may short across electrical circuits and cause damage to equipment or

severe burns or electrical shock to personnel.

NOTE

•

Perform Step 25 if no vdc is present on wire 1979A at connector REC14, terminal 2 in

Step 23.

•

Perform Step 26 if no vdc is present on wire 1979B at connector REC14, terminal 3 in

Step 23.

Step 25.

Disconnect THAAD control valve harness VIM No. 1, 24 pin connector (WP 0089).

Check for continuity across wire 1979A from VIM No. 1, 24 pin connector, terminal 2 to

REC14 connector, terminal 2.

a.

If there is continuity, replace VIM No. 1 (WP 0089).

b.

If there is no continuity, repair wire 1979A (TM 9-2320-325-14&P) or

replace THAAD control valve harness (WP 0088).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION