TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 30 of 1616
TM 9-2320-440-13&P
0002-2
0002
13.
Incorporates an electronic control system to help prevent damage to LHS/MRP system due to faulty
component or improper use.
14.
The HEMTT THAAD has no towing components and cannot tow a trailer.
CAUTION
The HEMTT THAAD vehicle cannot carry a standard flatrack or ISO container. Do
not attempt to load a standard flatrack or ISO container onto the HEMTT THAAD.
Failure to comply may result in damage to equipment.
15.
The HEMTT THAAD is only designed to carry a THAAD MRP.
16.
The HEMTT THAAD vehicle is referred to by different names, depending on how the vehicle is
configured.
Carrier.
Standard HEMTT THAAD vehicle, equipped with a 3 KW Tactical Quiet Generator, capable of
loading, unloading, and transporting a MRP.
Transporter.
HEMTT THAAD vehicle equipped with a CEM, MUJB, Missile-System Battery Box, and
related cabling designed to interface with an MRP.
Launcher.
HEMTT THAAD vehicle loaded with an MRP and fully mission capable.
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS
1.
Outrigger Controls.
Used to deploy and stow Outriggers.
2.
Auxiliary Work Lamps.
Illuminate MRP and Outrigger Controls.
3.
Outriggers.
Deployed to stabilize vehicle before using MRP.
4.
Deck Elevation Cylinders.
Used to elevate MRP into firing position.
5.
Rear Fenders.
Protect MRP from debris thrown by tires.
6.
MRP Rack Locks.
Used to lock MRP subframe in position before elevating MRP.
7.
MRP Controls.
Control operation of Deck Elevation Cylinders, MRP Locks, and hydraulic Ground Rod
Driver.
8.
Stowage Box.
Used to stow BII.
9.
Ball Valves.
Used to prevent air suspension from self-adjusting while vehicle is transported via air, rail,
or ship.
10.
3 KW Tactical Quiet Generator.
Missile Transporter-related component. Not covered in this manual.
Refer to the appropriate TQG manual for operating instructions.
11.
Auxiliary Work Light.
Part of BII.
Used to illuminate work areas.
12.
Generator Fuel Line.
Allows TQG to be refueled from main vehicle fuel tank.
13.
Vehicle Battery Box.
Houses and protects vehicle batteries.
14.
Ground Rod Driver.
Part of BII.
Used to position ground rods for electrical component grounding.
Back to Top
