TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 37 of 1616
TM 9-2320-440-13&P
0003-3/(4 blank)
0003
With an MRP fully loaded with a 13 1/2-ton (12,250 kg) nominal payload, the LHS is capable of:
•
Loading/unloading MRP from vehicle to 12 in. (31 cm) below ground level and any
intermediate level, refer to TM 9-2320-325-14&P.
•
Loading/unloading MRP from vehicle from uneven ground slopes of 5 degrees from the
vehicle’s lateral and horizontal axis.
TERMINAL HIGH-ALTITUDE AREA DEFENSE (THAAD) OVERVIEW
The HEMTT THAAD vehicle is only intended to load, transport, and utilize an MRP.
It is not capable of loading a
flatrack or ISO container.
The HEMTT THAAD has a 3 KW Tactical Quiet Generator (TQG). The TQC only charges HEMTT THAAD system
batteries, and is not a part of vehicle’s electrical system. For further information on TQG, refer to THAAD Launcher
IETM.
The HEMTT THAAD has moveable steps located under the battery box on the driver side of the vehicle. the steps
can be moved from the driver side to the passenger side of vehicle. The steps are used to access areas behind
TQG and CEM.
The vehicle has several added components that are beyond the scope of this manual. For further information on
the following components, refer to THAAD Launcher IETM:
•
Missile Round Palette (MRP) and related cables.
•
Missile Umbilical Junction Box (MUJB) and related cables.
•
Carrier Electronics Module (CEM) and related cables.
•
Missile Round Palette (MRP) battery box, batteries, and related cables.
The spare tire, davit, and all related components have been removed from the HEMTT THAAD to allow space for
above missile system components.
END OF WORK PACKAGE
Back to Top
