TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 453 of 1616

TM 9-2320-440-13&P

0045-3

0045

OUTRIGGERS DO NOT RETRACT (CONTINUED)

THAAD0668

Step 3.

Connect pressure gage to test port TP7. Start engine (

Check

pressure at test port TP7, while attempting to operate outriggers (WP 0013). Shut off

engine (

Disconnect pressure gage.

a.

If 3,000 psi (20,684 kPa) is not measured, replace outrigger control

valve (WP 0142).

b.

If 3,000 psi (20,684 kPa) is measured, replace left outrigger stabilizer

cylinder (WP 0144).

THAAD0634

Step 4.

Inspect hydraulic hoses 2746 and 2747, fittings, and tubing from outrigger control valve

to right outrigger stabilizer cylinder for leaks, kinks, and damage (WP 0119).

If hydraulic hoses, tubes, and/or fittings leak or are damaged, tighten loose

fittings or replace damaged tubes and hoses (WP 0119).

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION