TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 492 of 1616

TM 9-2320-440-13&P

0050-14

0050

44

Before

MRP Operation

a.

Check for proper operation of MRP system.

Check this by moving PTO switch (1) to ON

position. Indicator (2) should come on.

MRP does not

operate properly.

b.

Turn hydraulic selector switch (3) to MRP

position. Engage both MRP rack locks (4)

using control lever (5). RACK LOCKS

ENGAGED indicator (6) will come on.

Raise

both deck elevation cylinders (7) using control

lever (8).

c.

Lower both deck elevation cylinders (7) using

control levers (8). Retract both MRP rack

locks (4) using control lever (5). RACK

LOCKS ENGAGED indicator (6) will go out.

d.

Turn hydraulic selector switch (3) to OFF

position. Move PTO switch (1) to OFF

position. PTO indicator (2) will go out.

e.

Shut engine off (

45

After

Underneath

Vehicle

Check entire underside of vehicle for fluid and air

leaks.

Any class III leak or

air lines/fittings

leaking or

damaged.

Table 1.

Preventive Maintenance Checks and Services (Before). (Continued)

Item

No.

Interval

Item To Be

Checked Or

Serviced

Crewmember

Procedure

Not Fully Mission

Capable if:

TM 9-2320-347-10)