TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 573 of 1616

TM 9-2320-440-13&P

0063-5

0063

INSTALLATION

1.

Install wire rope (39) on quick release pin (32) and plate (33) with two swaging sleeves (38).

2.

Install two grommets (37) on plates (33).

3.

Install two plates (33) on bracket (36) with two screws (35) and locknuts (34).

NOTE

•

Route cables as noted prior to removal.

•

Install cable ties and cushion clips as required.

4.

Install cable (28) on two plates (33) with quick release pin (32).

5.

Install bracket (27) on crossmember (31) with two screws (30) and locknuts (29).

6.

Install cable (22) on vehicle.

7.

Connect cable (22) to cable (28).

8.

Install cushion clip (26) on cable (22).

9.

Install cushion clip (26) on bracket (27) with screw (25) and locknut (24).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10. Install cable (7) on vehicle.

11. Install cable (7) and cable (22) on screw (23) with locknut (21).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

12. Apply electrical sealant on ends of two cables (7 and 22).

THAAD0157