TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 578 of 1616

TM 9-2320-440-13&P

0064-2

0064

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

.

4.

Remove two locknuts (11), washers (12), screws (13), gasket (14), and grounding bar (4) from generator

platform (15). Discard locknuts.

5.

Remove two screws (16) and washers (17) from grounding bar (4).

END OF TASK

INSTALLATION

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

1.

Apply sealing compound to threads of two screws (16) and install two washers (17) and screws (16) on

grounding bar (4).

NOTE

Epoxy primer and epoxy hardener must be applied to side of grounding bar that will be

mounted to generator platform.

2.

Following manufacturer’s guidelines, apply epoxy primer to grounding bar (4).

3.

Following manufacturer’s guidelines, apply epoxy hardener to grounding bar (4).

4.

Install gasket (14) on grounding bar (4).

5.

Install gasket (14) and grounding bar (4) on generator platform (15) with two screws (13), washers (12), and

locknuts (11).

THAAD0153