TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 586 of 1616

TM 9-2320-440-13&P

0066-2

0066

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Air lines stay attached to relay valves when removing mounting bracket.

3.

Remove two locknuts (6), screws (7), and relay valve (8) from mounting bracket (5). Discard locknuts.

4.

Remove two locknuts (9), screws (10), and relay valve (11) from mounting bracket (5). Discard locknuts.

5.

Remove four locknuts (12), screws (13), and mounting bracket (5) from rear crossmember (14). Discard

locknuts.

END OF TASK

INSTALLATION

1.

Install mounting bracket (5) on rear crossmember (14) with four screws (13) and locknuts (12).

2.

Install relay valve (11) on mounting bracket (5) with two screws (10) and locknuts (9).

3.

Install relay valve (8) on mounting bracket (5) with two screws (7) and locknuts (6).

4.

Install input module (2) on mounting bracket (5) with four screws (4) and locknuts (3).

5.

Connect two input module connectors (1) to input module (2).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Connect batteries (TM 9-2320-325-14&P).

2.

Remove wheel chocks (

END OF TASK

END OF WORK PACKAGE

THAAD0215

TM 9-2320-347-10)