TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 58 of 1616
TM 9-2320-440-13&P
0007-4
0007
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
CAUTION
•
The MRP deck elevation cylinder locks must disengage when the elevation angle is
less than 5°. Verify that deck elevation cylinders and MRP deck cylinder locks have
properly disengaged. Failure to comply may result in damage to equipment.
•
As MRP approaches fully lowered position, slow its rate of descent.
Failure to
comply may result in damage to equipment.
NOTE
•
Positioning of MRP lift lever controls speed that MRP lowers. For fastest stowage, move
lever fully toward LOWER. To slow MRP descent, move lever toward NEUTRAL.
•
The engine will automatically decrease to low idle as the MRP is lowered.
7.
Push and hold palm button switch (8).
8.
Move MRP lift lever control (9) to LOWER position until deck elevation cylinders (8) are fully retracted
into stowed position.
9.
Release palm button switch (8).
10.
Disengage MRP rack locks (WP 0012).
11.
Engage MRP deck-to-subframe lock (Refer to THAAD Launcher IETM).
NOTE
Air suspension will automatically inflate when outriggers are stowed.
12.
Stow outriggers (WP 0013).
13.
Deploy MRP under-run bumper (Refer to THAAD Launcher IETM).
END OF TASK
END OF WORK PACKAGE
THAAD0196
Back to Top
