TM 9-2320-440-13&P
0087-8
0087
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
27. Disconnect connector (55) from bulkhead connector (56).
28. Remove four locknuts (57), screws (58), and bulkhead connector (56) from connector support bracket (59).
Discard locknuts.
29. Remove wire harness (13) from vehicle.
END OF TASK
INSTALLATION
NOTE
Install cable ties as needed.
1.
Install wire harness (13) in vehicle.
2.
Install bulkhead connector (56) on connector support bracket (59) with four screws (58) and locknuts (57).
3.
Connect connector (55) to bulkhead connector (56).
THAAD0514