TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 685 of 1616

TM 9-2320-440-13&P

0087-11

0087

NOTE

All solenoid connectors are installed the same way.

Right side shown.

10. Apply sealant to two gaskets (41) and install two gaskets (41) and connectors (40) on solenoids (42) and

tighten screws (39).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

11. Install wire harness (13) in four cushion clips (36).

12. Apply sealing compound to threads of four screws (33) and install four cushion clips (36) on compression

frame tube (37) at inside of left compression frame rail (38) with four washers (35), lockwashers (34), and

screws (33).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

13. Install wire harness (13) in cushion clip (31).

14. Install cushion clip (31) on diverter (32) with washer (30), lockwasher (29), and screw (28).

THAAD0510

THAAD0509