TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 804 of 1616

TM 9-2320-440-13&P

0107-4

0107

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Install fender (5) on fender bracket (6) with three washers (4), screws (3), washers (2), and locknuts (1).

5.

Repeat steps (1) through (4) to install right side fenders.

END OF TASK

FENDER BRACKET REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

•

Note position of brackets prior to removal to ensure proper installation.

•

Remove cushion clips as required.

1.

Remove four locknuts (1), screws (2), and fender bracket (3) from vehicle. Discard locknuts.

2.

Remove two locknuts (4), screws (5), cushion clip (6), and light bracket (7) from fender bracket (3). Discard

locknuts.

3.

Remove two locknuts (8), screws (9), and reflector (10) from light bracket (7). Discard locknuts.

THAAD0339

THAAD0342