TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 813 of 1616

TM 9-2320-440-13&P

0110-1

0110

FIELD LEVEL MAINTENANCE

REAR ROLLER ASSEMBLY REPLACEMENT

INITIAL SETUP:

REMOVAL

WARNING

Rear roller assembly is heavy (Aprox. 329 lbs).

Attach a suitable lifting device to rear roller

assembly before removing.

Failure to comply may result in serious injury or death

to personnel.

1.

Attach a suitable lifting device to rear roller assembly (1).

NOTE

Both left and right sides of rear roller assembly are removed the same way. Right side

shown.

2.

Remove locknut (2), bracket (3), and screw (4) from rear roller assembly (1) and bracket (5). Discard locknut.

3.

Remove two locknuts (6) and screws (7) from rear roller assembly (1) and bracket (5). Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0205

Tools and Special Tools

Lifting Device, Minimum Capacity 2,100 lbs

(953 kg)

Tool Kit, General Mechanic’s: Automotive

(WP 0183, Item 25)

Materials/Parts

Locknut, (3), (WP 0184, Item 10)

Personnel Required

MOS 63B Wheeled vehicle mechanic (2)

References

None

Equipment Conditions

Rear light bar assembly removed (WP 0083)