TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 814 of 1616

TM 9-2320-440-13&P

0110-2

0110

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Repeat steps (2) and (3) to remove left side of rear roller assembly (1).

NOTE

Shims may or may not be installed between rear roller assembly and mounting brackets.

5.

Using a suitable lifting device, Soldier A and Soldier B remove rear roller assembly (1) and shims (8) from

bracket (5) and vehicle.

END OF TASK

INSTALLATION

WARNING

Rear roller assembly is heavy (Aprox. 329 lbs). Attach a suitable lifting device to rear roller

assembly before installing. Failure to comply may result in serious injury or death

to personnel.

1.

Attach a suitable lifting device to rear roller assembly (1).

2.

Using suitable lifting device, Soldier A and Soldier B place shims (8) and rear roller assembly (1) on vehicle.

NOTE

Both left and right sides of rear roller assembly are installed the same way. Right side

shown.

3.

Install rear roller assembly (1) on bracket (5) with two screws (7) and locknuts (6).

4.

Install bracket (3) and rear roller assembly (1) on bracket (5) with screw (4) and locknut (2).

5.

Repeat steps (3) and (4) to install left side of rear roller assembly.

THAAD0205