TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 868 of 1616
TM 9-2320-440-13&P
0120-2
0120
FILL
1.
Lightly lubricate preformed packing (4) with clean oil and install preformed packing (4) on drain plug (3).
2.
Install drain plug (3) on reservoir (2).
NOTE
•
Hydraulic oil additive should be added at a ratio of 0.33% to 0.66% by volume to reservoir
hydraulic oil.
•
For every 1 gal (3.8 L) of oil put into reservoir, .42 to .84 oz (12.4 to 24.8 mL) of hydraulic
oil additive has to be added.
3.
Fill reservoir (2) with oil.
4.
Add 19 to 38 oz (562 to 1124 mL) of hydraulic oil additive to reservoir (2).
5.
Check sight glass (5) on reservoir (2).
Hydraulic oil should be halfway between FULL and ADD at FULL
COLD mark.
If low, add hydraulic oil.
6.
Install filler cap (1) on reservoir (2).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Remove wheel chocks (
END OF TASK
END OF WORK PACKAGE
THAAD0566
TM 9-2320-347-10)
Back to Top
