TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 877 of 1616
TM 9-2320-440-13&P
0122-3
0122
WARNING
Hydraulic reservoir is heavy (Aprox. 120 lbs). Do not attempt to lift hydraulic reservoir without
the aid of Soldier B. Failure to comply may result in injury to personnel.
7.
Soldier A and Soldier B remove hydraulic reservoir (11) from fender (26).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
8.
Remove fitting (13) and preformed packing (27) from hydraulic reservoir (11). Discard preformed packing.
NOTE
Note position of elbow prior to removal to ensure proper installation.
9.
Remove elbow (15) and preformed packing (28) from hydraulic reservoir (11). Discard preformed packing.
10. Remove plug (29) and preformed packing (30) from hydraulic reservoir (11). Discard preformed packing.
END OF TASK
INSTALLATION
1.
Lightly lubricate preformed packing (30) with clean oil and install preformed packing (30) and plug (29) on
hydraulic reservoir (11).
NOTE
Install elbow as noted prior to removal.
2.
Lightly lubricate preformed packing (28) with clean oil and install preformed packing (28) and elbow (15) on
hydraulic reservoir (11).
3.
Lightly lubricate preformed packing (27) with clean oil and install preformed packing (27) and fitting (13) on
hydraulic reservoir (11).
THAAD0587
Back to Top
