TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 882 of 1616

TM 9-2320-440-13&P

0123-2

0123

CLEANING

WARNING

Compressed air used for cleaning purposes shall not exceed 30 psi (207 kPa). Use

only with effective chip guarding and personal protective equipment (goggles/

shield, gloves, etc.), or injury to personnel may result.

1.

Clean hydraulic reservoir (5), three nipples (2, 4, and 7), and elbow (3) with solvent cleaning compound and

clean with lint-free rags.

2.

Dry hydraulic reservoir (5), nipples (2, 4, and 7), and elbow (3) with compressed air.

3.

Clean two strainers (1 and 6) with solvent cleaning compound. Inspect for tears and large pieces of

contamination. Dry with compressed air.

END OF TASK

INSTALLATION

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

1.

Coat threads on both ends of nipple (7) with pipe thread sealing compound.

2.

Install nipple (7) on hydraulic reservoir (5).

3.

Install strainer (6) on nipple (7).

THAAD0390