TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 890 of 1616

TM 9-2320-440-13&P

0125-2

0125

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Tag and mark connectors prior to removal to ensure proper installation.

3.

Loosen two screws (8) and remove connectors (9) and gaskets (10) from directional control valve (11).

Discard gaskets.

4.

Remove four screws (12), directional control valve (11), and five preformed packings (13) from main

manifold (14). Discard preformed packings.

END OF TASK

INSTALLATION

NOTE

Three directional control valves are installed the same way.

1.

Lightly lubricate five preformed packings (13) with clean oil and install five preformed packings (13) and

directional control valve (11) on main manifold (14) with four screws (12).

2.

Install two gaskets (10) and connectors (9) on directional control valve (11) and tighten two screws (8).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing. To avoid injury or death, keep away

from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

3.

Apply sealing compound to heads of two screws (8).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

THAAD0018