TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 908 of 1616

TM 9-2320-440-13&P

0127-2

0127

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Tag and mark connectors prior to removal to ensure proper installation.

•

Remove cable ties as required.

3.

Loosen screw (7) and remove connector (8) and gasket (9) from coil (10).

NOTE

Note position of coil prior to removal to ensure proper installation.

4.

Remove nut (11) and coil (10) from free-flow valve (12).

5.

Remove free-flow valve (12) from hydraulic manifold (13).

6.

Remove preformed packing (14), two back-up rings (15), and preformed packing (16) from free-flow valve

(12). Discard preformed packings.

END OF TASK

INSTALLATION

1.

Lightly lubricate two preformed packings (14 and 16) and back-up rings (15) with clean oil and install two

preformed packings (14 and 16) and back-up rings (15) on free-flow valve (12).

2.

Install free flow valve (12) on hydraulic manifold (13). Tighten free-flow valve (12) to 22 lb-ft (29.8 N•m).

NOTE

Install coil as noted prior to removal.

3.

Install coil (10) on free-flow valve (12) with nut (11).

4.

Install gasket (9) and connector (8) on coil (10) and tighten screw (7).

THAAD0016