TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 900 of 1616
TM 9-2320-440-13&P
0126-8
0126
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
.
30. Remove two quick disconnects (72) and preformed packings (73) from fittings (74). Discard preformed
packings.
31. Remove two dust caps (75) from quick disconnects (72).
32. Remove two fittings (74) and preformed packings (76) from manifold (42). Discard preformed packings.
33. Remove two fittings (77) and preformed packings (78) from manifold (42). Discard preformed packings.
34. Remove fitting (79) and preformed packing (80) from manifold (42). Discard preformed packing.
END OF TASK
INSTALLATION
NOTE
•
Install quick disconnects, elbows, and fittings as noted prior to removal.
•
Install cable ties as required.
1.
Lightly lubricate preformed packing (80) with clean oil and install preformed packing (80) and fitting (79) on
manifold (42).
2.
Lightly lubricate two preformed packings (78) with clean oil and install preformed packings (78) and
fittings (77) on manifold (42).
3.
Lightly lubricate two preformed packings (76) with clean oil and install preformed packings (76) and
fittings (74) on manifold (42).
4.
Install two dust caps (75) on quick disconnects (72).
5.
Lightly lubricate two preformed packings (73) with clean oil and install preformed packings (73) and quick
disconnects (72) on fittings (74).
THAAD0134
Back to Top
