TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 927 of 1616

TM 9-2320-440-13&P

0129-3

0129

4.

Using suitable lifting device, remove hook arm (4) from main frame (9).

5.

Remove suitable lifting device from hook arm (4).

END OF TASK

DISASSEMBLY

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

If hook arm retaining pin or snap pin replacement is necessary, grind chain tack weld

smooth on hook arm surface and tack weld pin chain at same location.

1.

Remove two locknuts (1) and rubber bumpers (2) from hook arm (3). Discard locknuts.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Seals are removed by prying outward.

2.

Remove four seals (4) from hook arm (3). Discard seals.

3.

Remove two lube fittings (5) from hook arm (3).

THAAD0315

THAAD0316