TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 930 of 1616

TM 9-2320-440-13&P

0129-6

0129

ASSEMBLY

NOTE

•

Apply light coat of grease to outer surface of bushings prior to installation.

•

Apply light coat of grease to threads of removal/installation tool prior to use.

1.

Using removal/installation tool (use five of six pieces), aline lube hole in bushing (1) with lube fitting hole in

hook arm (2) and install two bushings (1) in hook arm (2) as shown.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Check lube fitting hole in hook arm (2) for restrictions.

NOTE

If lube fitting hole is restricted by bushing, go to step (4) of disassembly.

3.

Install two lube fittings (3) in hook arm (2).

4.

Apply light coat of grease to outer edges of seal (4) and install four seals (4) in hook arm (2).

THAAD0318

THAAD0319