TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 937 of 1616

TM 9-2320-440-13&P

0130-3

0130

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Both hook arm cylinder manifolds are removed the same way. Right side shown.

•

Position drain pan under hydraulic lines and fittings being removed.

•

Tag and mark connectors and hydraulic lines prior to removal to ensure proper

installation.

•

Cap and plug hydraulic lines upon removal.

•

Remove cable ties as required.

9.

Remove hose 2892 (7) and hose 2882 (8) from two fittings (9 and 10).

WARNING

Hook arm cylinder manifold will have hydraulic pressure behind it.

Hook arm

cylinder manifold must be covered with clean rag and screws loosened equally on

manifold to prevent oil spray.

Failure to comply may result in serious injury to

personnel.

10. Remove four screws (11), lockwashers (12), two preformed packings (13), and hook arm manifold (14) from

hook arm cylinder (15). Discard lockwashers and preformed packings.

THAAD0234