TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 945 of 1616
TM 9-2320-440-13&P
0131-3/(4 blank)
0131
INSTALLATION
WARNING
Lift hook weighs 200 lbs (91 kg). Attach suitable lifting device prior to installation to
prevent possible injury to personnel.
1.
Attach suitable lifting device to hook (1).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
2.
Apply antiseize compound to pivot pin (8).
3.
Using suitable lifting device, install hook (1) on hook arm (5) with pivot pin (8), two washers (7), and cotter
pin (6).
4.
Apply antiseize compound to retaining pin (4).
5.
Install retaining pin (4), washer (3), and snapper pin (2) on hook arm (5) and hook (1).
6.
Remove suitable lifting device from hook (1).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Remove wheel chocks (
END OF TASK
END OF WORK PACKAGE
TM 9-2320-347-10)
Back to Top
