TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 938 of 1616

TM 9-2320-440-13&P

0130-4

0130

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

11. Loosen two screws (16) and remove connectors (17) and gaskets (18) from solenoid valve coils (19). Discard

gaskets.

12. Remove two fittings (9 and 10) and preformed packings (20 and 21) from hook arm manifold (14). Discard

preformed packings.

END OF TASK

INSTALLATION

NOTE

•

Both hook arm manifolds are installed the same way. Right side shown.

•

Install cable ties as required.

1.

Lightly lubricate two preformed packings (20 and 21) with clean oil and install preformed packings (20 and 21)

and fittings (9 and 10) on hook arm manifold (14).

2.

Install two gaskets (18) and connectors (17) on solenoid valve coils (19) and tighten screws (16).

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in a well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

3.

Apply adhesive on head of two screws (16).

THAAD0235