TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 949 of 1616

TM 9-2320-440-13&P

0132-3

0132

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

There are two main frame cylinder manifolds.

•

Both main frame cylinder manifolds are removed the same way. Left side shown.

•

Position drain pan under hydraulic lines and fittings being removed.

•

Tag and mark hydraulic lines and connectors prior to removal to ensure proper

installation.

•

Cap and plug hydraulic lines upon removal.

•

Remove cable ties as required.

8.

Remove hose 2888 (7) and hose 2588 (8) from two fittings (9 and 10).

WARNING

Main frame cylinder manifold will have hydraulic pressure behind it.

Main frame

cylinder manifold must be covered with clean rag and screws loosened equally on

manifold to prevent oil spray.

Failure to comply may result in serious injury to

personnel.

9.

Remove four screws (11), lockwashers (12), two preformed packings (13), and main frame cylinder

manifold (14) from main frame cylinder (15). Discard lockwashers and preformed packings.

THAAD0226