TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 958 of 1616

TM 9-2320-440-13&P

0133-4

0133

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

•

Perform step (3) if lube fitting was removed.

•

Install lube fitting as noted prior to removal.

3.

Install lube fitting (10) on main frame cylinder (1).

WARNING

Main frame cylinder weighs 325 lbs (148 kg). Attach suitable lifting device prior to

installation to prevent possible injury to personnel.

4.

Attach suitable lifting device to main frame cylinder (1).

WARNING

•

Use care when installing retaining rings.

Retaining rings are under tension and can

act as projectiles when released, causing injury to personnel.

•

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in a well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

5.

Apply antiseize compound on shaft of pivot pin (7).

6.

Using suitable lifting device, install barrel end of main frame cylinder (1) on compression frame (9) with pivot

pin (7), shim (8), and retaining ring (6).

7.

Remove suitable lifting device from main frame cylinder (1).

THAAD0414