TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 960 of 1616

TM 9-2320-440-13&P

0133-6

0133

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

15. Fully compress cylinder rod (19) in main frame cylinder (1).

16. Extend cylinder rod (19) out .25 in. (6.4 mm), loosen screw (20), and rotate rod lug (21) so lug bore alines with

holes in main frame (5). Tighten screw (20) to 40 lb-ft (54 N•m).

WARNING

•

Use care when installing retaining rings.

Retaining rings are under tension and can

act as projectiles when released, causing injury to personnel.

•

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in a well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

17. Apply antiseize compound on shaft of pivot pin (4).

18. When lug bore and main frame holes aline, install rod lug (21) with pivot pin (4), shim (3), and retaining

ring (2).

NOTE

Perform step (19) if lube fitting was removed.

19. Install lube fitting (11) in rod lug (20).

THAAD0416

THAAD0417