TM-9-2320-440-13-P
TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER
TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
AUGUST 2010
TM-9-2320-440-13-P - Page 985 of 1616
TM 9-2320-440-13&P
0136-1
0136
FIELD LEVEL MAINTENANCE
LHS MAIN MANIFOLD/BRACKET REPLACEMENT
INITIAL SETUP:
REMOVAL
WARNING
The THAAD hydraulic system operates at oil pressure up to 3,250 psi (22,409 kPa).
Never disconnect any hydraulic line or fitting without first dropping pressure to
zero. Failure to comply may result in serious injury or death to personnel.
NOTE
•
Position drain pan under hydraulic lines and fittings being removed.
•
Tag and mark hydraulic lines prior to removal to ensure proper installation.
•
Cap and plug hydraulic lines upon removal.
•
Remove cable ties as required.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Tools and Special Tools
Lifting Device, Minimum Capacity 200 lbs
(91 kg)
Pan, Drain (WP 0183, Item 10)
Set, Cap and Plug (WP 0183, Item 17)
Tool Kit, General Mechanic’s: Automotive
(WP 0183, Item 25)
Wrench, Torque (WP 0183, Item 29)
Materials/Parts
Gasket, (2), (WP 0184, Item 71)
Locknut, (1), (WP 0184, Item 26)
Locknut, (8), (WP 0184, Item 21)
Lockwasher, (6), (WP 0184, Item 59)
Oil, Hydraulic (WP 0186, Item 21)
Packing, Preformed, (2), (WP 0184, Item 42)
Packing, Preformed, (2), (WP 0184, Item 118)
Packing, Preformed, (2), (WP 0184, Item 14)
Packing, Preformed, (4), (WP 0184, Item 98)
Packing, Preformed, (4), (WP 0184, Item 111)
Packing, Preformed, (2), (WP 0184, Item 74)
Packing, Preformed, (1), (WP 0184, Item 43)
Packing, Preformed, (1), (WP 0184, Item 129)
Packing, Preformed, (2), (WP 0184, Item 78)
Materials/Parts (Continued)
Packing, Preformed, (2), (WP 0184, Item 83)
Packing, Preformed, (4), (WP 0184, Item 81)
Packing, Preformed, (1), (WP 0184, Item 79)
Tags, Identification (WP 0186, Item 32)
Ties, Cable, Plastic (WP 0186, Item 34)
Personnel Required
MOS 63B Wheeled vehicle mechanic (2)
References
None
Equipment Conditions
Engine OFF (
Wheels chocked (
Batteries disconnected (TM 9-2320-325-14&P)
Auxiliary work lamp removed (WP 0058)
High idle/throttle inhibit relays removed
(WP 0065)
Directional control valve removed (WP 0125)
Relief valve removed (WP 0145)
Free-flow valve and coil removed (WP 0127)
VIM units and mounting bracket removed
(WP 0089)
TM 9-2320-347-10)
TM 9-2320-347-10)
Back to Top
