TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 387 of 552
FIELD MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS (RPSTL) INTRODUCTION
INTRODUCTION
SCOPE
This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic
equipment (TMDE); and other special support equipment required for performance of Maintainer Maintenance of
the M101 and M116 series trailers. It authorizes the requisitioning, issue, and disposition of spares, repair parts, and
special tools as indicated by the Source, Maintenance, and Recoverability (SMR) codes.
GENERAL
In addition to the Introduction work package, this RPSTL is divided into the following work packages:
1.
Repair Parts List Work Packages.
Work packages containing lists of spares and repair parts authorized
by this RPSTL for use for use in the performance of maintenance. These work packages also include parts
which must be removed for replacement of the authorized parts. Parts lists are composed of functional
groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and
item number sequence. Sending units, brackets, filters, and bolts are listed with the component they mount
on. Bulk materials are listed by item name in FIG. BULK at the end of the work packages. Repair parts kits
are listed separately in their own functional group and work package. Repair parts for reparable special tools
are also listed in a separate work package. Items listed are shown on the associated illustrations.
2.
Special Tools List Work Packages.
Work packages containing lists of special tools, special TMDE, and
special support equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in
the DESCRIPTION AND USABLE ON CODE (UOC) column). Tools that are components of common tool
sets and/or Class VII are not listed.
3.
Cross-Reference Indexes Work Packages.
There are two cross-reference indexes work packages in this
RPSTL: The National Stock Number (NSN) Index work package, and the Part Number (P/N) Index work
package. The National Stock Number Index work package refers you to the figure and item number.
EXPLANATION OF ENTRIES IN THE REPAIR PARTS LIST AND SPECIAL TOOLS LIST WORK PACKAGES
ITEM NO. (Column (1)).
Indicates the number used to identify items called out in the illustration.
SMR CODE (Column (2))
. The SMR code containing supply/requisitioning information, maintenance level
authorization criteria, and disposition instruction, as shown in the following breakout. This entry may be subdivided
into four subentries, one for each service.
Table
1.
SMR Code Explanation.
Source Code
Maintenance Code
Recoverability Code
XX
XX
X
1st two positions: How to
get an item.
3rd position: Who can
install, replace, or use
the item.
4th position: Who can do
complete repair* on
the item.
5th position: Who
determines disposition
action on unserviceable
items.
TM 9-2330-202-13&P
0081
0081-1
Back to Top
