TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 392 of 552
SPECIAL INFORMATION
UOC.
The UOC appears in the lower left corner of the Description Column heading. Usable on codes are shown as
"UOC:.
.." in the Description Column (justified left) on the first line under the applicable item/nomenclature. Uncoded
items are applicable to all models. Identification of the UOCs used in the RPSTL are:
Code
Used On
257
263
TC1
646
258
CT1
M101A1
M101A2
M101A3
M116A1
M116A2
M116A3
Fabrication Instructions.
Bulk materials required to manufacture items are listed in the bulk material functional
group of this RPSTL. Part numbers for bulk material are also referenced in the Description Column of the line item
entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be
manufactured or fabricated are found in (TM 9-2330-202-13&P).
Index Numbers.
Items which have the word BULK in the figure column will have an index number shown in the
item number column. This index number is a cross-reference between the NSN/Part Number (P/N) Index work
packages and the bulk material list in the repair parts list work package.
HOW TO LOCATE REPAIR PARTS
1.
When NSNs or Part Numbers Are Not Known.
First.
Using the table of contents, determine the assembly group to which the item belongs. This is
necessary since figures are prepared for assembly groups and subassembly groups, and lists are divided
into the same groups.
Second.
Find the figure covering the functional group or the subfunctional group to which the item belongs.
Third.
Identify the item on the figure and note the number(s).
Fourth.
Look in the repair parts list work packages for the figure and item numbers. The NSNs and part
numbers are on the same line as the associated item numbers.
2.
When NSN Is Known.
First.
If you have the NSN, look in the STOCK NUMBER column of the NSN/Part Number (P/N) Index work
package. The NSN is arranged in NIIN sequence. Note the figure and item number next to the NSN.
Second.
Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
3.
When Part Number Is Known.
First.
If you have the part number and not the NSN, look in the PART NUMBER column of the NSN/Part
Number (P/N) Index work package. Identify the figure and item number.
Second.
Look up the item on the figure in the applicable repair parts list work package."
4.
When Reference Designator Is Known.
First.
If you know the reference designator, look in the REFERENCE DESIGNATOR column of the reference
designator index work package. Note the figure and item number.
Second.
Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
END OF WORK PACKAGE
TM 9-2330-202-13&P
0081
0081-6
Back to Top
