TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 62 of 552
INSTALLING RACK AND CANVAS COVER ASSEMBLIES (M101A2 AND M101A3) - Continued
WARNING
Canvas cover weighs over 100 lb (45 kg). Use suitable lifting device. Failure to comply may
result in death or injury to personnel. Seek medical attention in the event of an injury.
NOTE
Canvas cover assembly should be positioned so that the side marked "FRONT" faces the
front of the trailer.
17.
Spread canvas cover assembly (Figure 5, Item 1) over five bow assemblies (Figure 5, Item 2).
18.
Unfold front curtain (Figure 5, Item 4) and two side curtains (Figure 5, Item 3).
19.
From inside, attach top of canvas cover assembly (Figure 5, Item 1) to five bow assemblies
(Figure 5, Item 2) by securing 10 tiedown straps (Figure 5, Item 5) using 10 snap fasteners
(Figure 5, Item 11).
20.
Unfold back curtain (Figure 5, Item 6).
21.
Attach 14 ropes (Figure 5, Item 7) to 14 cargo hooks (Figure 5, Item 8) on cargo body
(Figure 5, Item 10). Fasten eight straps (Figure 5, Item 9) on canvas cover assembly (Figure 5, Item 1).
1
1
1
2
2
3
4
5
6
9
10
11
7
8
M116_M101_032
Figure 5.
Canvas Cover Assembly Installation.
END OF TASK
TM 9-2330-202-13&P
0005
0005-6
Back to Top
