TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 61 of 552
INSTALLING RACK AND CANVAS COVER ASSEMBLIES (M101A2 AND M101A3) - Continued
9.
At rear of trailer, align two strap hinge assemblies (Figure 4, Item 2) on rear rack assembly (Figure 4, Item 3)
with two hinges (Figure 4, Item 11) on roadside side rack assembly (Figure 4, Item 12).
10.
Install two straight headed pins (Figure 4, Item 1), with heads facing up, in two strap hinge assemblies
(Figure 4, Item 2) and hinges (Figure 4, Item 11). Install two cotter pins (Figure 4, Item 10) in two straight
headed pins (Figure 4, Item 1).
11.
At curbside, repeat Steps 9 and 10 to install curbside rear rack assembly (Figure 4, Item 5) on curbside side
rack assembly (Figure 4, Item 12).
12.
Close both rear rack assemblies (Figure 4, Items 3 and 5).
13.
Install connecting link (Figure 4, Item 6) in two top strap latch assemblies (Figure 4, Item 4) of both rear rack
assemblies (Figure 4, Items 3 and 5).
14.
Install two connecting links (Figure 4, Item 7) in two bottom strap latch assemblies (Figure 4, Item 9) on both
rear rack assemblies (Figure 4, Items 3 and 5) and two holes in cargo body (Figure 4, Item 8).
15.
Align one of five bow assemblies (Figure 4, Item 13) with two stakes (Figure 4, Item 14) in both side rack
assemblies (Figure 4, Item 12). Push bow assembly (Figure 4, Item 13) evenly into stakes (Figure 4, Item 14)
until fully installed in side rack assemblies (Figure 4, Item 12).
16.
Repeat Step 15 to install remaining four bow assemblies (Figure 4, Item 13).
5
6
1
2
2
3
4
7
7
8
9
10
10
11
11
12
12
12
13
14
14
M116_M101_031
Figure 4.
Rear Rack and Bow Assembly Installation.
TM 9-2330-202-13&P
0005
0005-5
Back to Top
