Electrical System
1.
Trailers are equipped with a chassis wiring harness (Figure 3, Item 1) that terminates at a covered junction
box (Figure 3, Item 2) on the roadside drawbar. The intervehicular cable (Figure 3, Item 3) is fixed to
the trailer.
2.
Trailers are equipped with a two-light composite stoplight-taillight configuration that may have standard
lamps or LEDs.
1
2
3
M116_M101_009
Figure 3.
Electrical System.
Axle, Frame, And Suspension
The M116A3 is a variant of the M116A2. Heavy-duty axles, four-inch frames, and spring assemblies allow for a
greater payload than the M116A2. In addition, the M116A3 uses the HMMWV radial runflat wheel assemblies.
END OF WORK PACKAGE
TM 9-2330-202-13&P
0003
0003-3/4 blank