TM-9-2330-227-14-P
SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JUNE 1985
TM-9-2330-227-14-P - Page 180 of 576
TM 9-2330-227-14&P
MASTER CYLINDER - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION - CONTINUED
14.
Master cylinder
body (1)
15.
Vent hose (4)
16.
Vent tube (6)
17.
Clamp loop (5)
18.
Vent tube (6)
and filler cap (2)
19.
20.
Master cylinder (1)
21.
Bracket studs (12)
22.
Master cylinder
body (1) and
bracket studs (12)
23.
Master cylinder
body (1)
24.
Adapter (15)
Filler cap (2) and
spacer ring (3)
Clamp loop (5)
Vent hose (4)
with clamp loop (5)
Screw (7)
Fitting (8)
Master cylinder
body (1)
Boot (9), collar
(10), and strap (11)
Master cylinder
body (1)
Three lock-
washers (13) and
nuts (14)
Adapter (15) and
gasket (16)
Nut (17)
Screw in, and tighten using 1-inch
open-end wrench.
Put in place.
Put in place.
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Screw in, and tighten using 5/8-inch
and 1-inch open-end wrenches.
Take out of vise equipped with jaw caps.
Put in place.
Put on.
Screw in, and tighten using 9/16-
inch socket, 5-inch extension, and
ratchet handle with 1/2-inch drive.
a.
b.
a.
b.
Wrap threads clockwise
two turns with teflon tape.
Screw in, and tighten using
inch open-end wrench.
Screw in, and tighten using
11/16-
1/2-inch
and 5/8-inch open-end
Take drain pan out.
wrenches.
4-102
Back to Top
